×
The Replacement Lotion Pump Dispenser 4cc for Shampoo Lotion Soap Bottles Home Spa Salon Massage Oil Use delivers a consistent 4cc output per press from durable PP plastic construction. After installing a quality replacement pump, the difference is immediate — smooth actuation, no dripping, and reliable dose delivery whether dispensing shampoo, lotion, soap, or massage oil. Compatible with 28/410, 33/410, and 38/410 closure sizes, it fits the majority of standard personal care bottles used in home, spa, and salon environments.
Ordering a replacement pump without confirming the exact bottle neck thread profile is a common sourcing mistake — what looks standard on a spec sheet can still cause fitment issues on arrival. This dispenser covers three widely used neck finishes to reduce compatibility risk and simplify replacement ordering.
Verified product attributes are listed below. Custom tube lengths are available for non-standard bottle heights.
| Specification | Detail |
|---|---|
| Output per press | 4cc (4 ml) |
| Material | PP (Polypropylene) plastic |
| Compatible closures | 28/410, 33/410, 38/410 |
| Available colors | White, Black, Brown, Yellow, Purple |
| Leak protection | Non-spill design |
| Custom options | Tube length and quantity customization accepted |
The 4cc output per press — measured in milliliters, not grams — is the specification users reference most when comparing dispensers. A well-calibrated lotion pump primes within 2 to 3 strokes; anything beyond that signals air-lock or dip tube resistance, which frustrates users well before any formula concern appears. This pump maintains consistent dose delivery across repeated use.
The non-spill valve prevents leaking between presses — a detail easy to overlook on a spec sheet but immediately noticeable in daily use. In bathroom environments involving humidity, temperature changes, and water exposure, a dripping pump causes product waste and surface staining. The sealed valve maintains integrity under standard bathroom conditions, keeping surfaces and bottle exteriors clean.
This replacement lotion pump dispenser fits 28/410, 33/410, and 38/410 bottle closures — covering the most commonly used neck sizes in shampoo, lotion, soap, and massage oil packaging. The first number in each code indicates the neck diameter in millimeters. If the neck size is unclear, measure the inner diameter of the opening before ordering to confirm fit.
Made from polypropylene (PP) plastic, this dispenser resists repeated water exposure, mild surfactants, and cosmetic-grade oils in normal home and salon use. PP is a reliable material for lotion and soap dispensers under standard conditions. For formulas with high alcohol content or aggressive solvents, confirm material compatibility separately — PP performs well with shampoo, lotion, soap, and massage oil.
The primary use for this pump is replacing a worn dispenser on an existing shampoo, lotion, or soap bottle. Springs lose tension and valves lose seal through normal wear. Replacing the pump restores consistent dosing without discarding the bottle. The 4cc dose suits body lotion, hand soap, and shampoo applications where a moderate output per press is appropriate.
In spa and salon settings, dispensers handle repeated use across massage oils, conditioners, treatment serums, and body lotions. The 4cc output covers massage oil application in a single press, reducing interruption during treatments. The non-spill valve limits product waste on treatment surfaces, and three compatible closure sizes let this pump replace dispensers on most standard professional product bottles.
Massage and body oils behave differently from water-based lotions due to higher viscosity. The 4cc output at the higher end of standard lotion pump dosing suits oil applications where one press delivers a practical amount. PP plastic is compatible with carrier oils, essential oil blends, and synthetic massage oil formulations under typical use conditions.
Several factors distinguish the Replacement Lotion Pump Dispenser 4cc for Shampoo Lotion Soap Bottles Home Spa Salon Massage Oil Use from standard options:
Yuyao Mingbang Spray Packaging Co., Ltd. is located in Yuyao, Zhejiang Province, China — a recognized center for spray packaging and pump manufacturing. The company produces hand button sprayers, hand pressure sprayers, liquid dispensers, plastic spray bottles, and acrylic bottles for cosmetics, daily chemicals, medicine, and health care markets globally. Convenient transport access supports sample fulfillment and production order delivery for international buyers.
How do I confirm fit with my bottle?
This pump fits 28/410, 33/410, and 38/410 closures. The first number indicates the neck diameter in millimeters. Measure the inner diameter of the bottle neck if the size is not marked on the bottle.
Can the tube length be customized?
Yes. Custom tube lengths and order quantities are accepted. Contact the manufacturer with your bottle height to confirm the correct dip tube length.
How is quality controlled?
The factory operates a QC team following TQM standards at each production stage, with photo and video documentation available on request.
Is custom branding available?
Yes. Custom brand logo printing is available. Standard packing is in neutral cartons; custom logo packaging is provided with buyer authorization letters.
EN
