Longcheng Plastic PP Non-Spill Pump Sprayer MB-AP002 Screw-On Closure for Chemical House Cleaning Strong Head Foaming Trigger

Longcheng Plastic PP Non-Spill Pump Sprayer MB-AP002 Screw-On Closure for Chemical House Cleaning Strong Head Foaming Trigger

The Longcheng Plastic PP Non-Spill Pump Sprayer MB-AP002 Screw-On Closure for Chemical House Cleaning Strong Head Foaming Trigger is an all-plastic polypropylene trigger sprayer engineered for chemical cleaning and house cleaning applications. Manufactured by Yuyao Mingbang Spray Packing Co., Ltd. in Ningbo, Zhejiang, China, the MB-AP002 features a screw-on closure in four neck finish configurations — 28/400, 28/410, 28/415, and 28/410 Ratchet — with a discharge rate of 1.1±0.1 mL per stroke and a strong head foaming trigger for consistent foam output where dosing control and surface contact time are required.

Specification

Key Features and Benefits

1. All-Plastic PP Construction for Chemical Resistance

The MB-AP002 is manufactured entirely from polypropylene (PP), selected for its resistance to water-based and mild chemical cleaning formulas. Unlike trigger sprayers that incorporate metal springs in the formula-contact pathway, all-plastic PP construction eliminates corrosion risk under sustained chemical exposure. If your formula contains surfactants, dilute acids, or household chemical concentrates, PP is the appropriate baseline material to specify. For high-alcohol or aggressive chemical formulas, verify compatibility through physical sample testing before production commitment.

2. Non-Spill Screw-On Closure — Four Neck Finish Options

The screw-on closure mechanism prevents leakage during storage, transport, and use — a basic safety requirement for chemical dispensing applications. Four neck finish configurations are available: 28/400, 28/410, 28/415, and 28/410 Ratchet. A common sourcing mistake is ordering based on the nominal neck size without confirming thread profile against the target bottle. Sample the MB-AP002 across relevant neck finish variants before production commitment to verify fitment and prevent rework. The 28/410 Ratchet option provides tamper-evidence functionality for product specifications that require it.

3. Precision Discharge Rate — 1.1±0.1 mL/T

The specified discharge rate is 1.1±0.1 mL per trigger stroke. For cleaning products where dosing consistency affects formula cost per application, a defined output tolerance is more useful than a nominal dose alone. The nominal discharge rate is measured under controlled vertical press conditions; actual dispense volume varies based on press angle and user speed, affecting dosing consistency in real use.

4. Strong Head Foaming Trigger

The strong head foaming trigger produces a foam output pattern suited for surface cleaning applications requiring dwell time. Foam output reduces formula run-off on vertical surfaces such as tiles and equipment housings, increasing coverage efficiency compared to fine mist patterns. This makes the MB-AP002 appropriate for household surface cleaners, bathroom and kitchen cleaning products, and industrial degreasers where foam contact time drives cleaning performance.

Application Scenarios

The MB-AP002 is suited for the following categories based on its specifications and construction:

• Chemical House Cleaning: Bathroom, kitchen, multi-surface, and floor cleaning formulations benefit from the foaming action and non-spill screw-on closure. The PP construction handles standard household chemical concentrations under normal use conditions without material degradation.
• Industrial Cleaning Products: The chemical-resistant PP body supports dilute surfactant-based degreasers and general-purpose industrial surface cleaners. For formulations with higher chemical aggressiveness, formula-compatibility testing against the specific pump configuration is required before production approval.
• Professional and Institutional Use: The strong head design supports janitorial cleaning supplies, hospitality cleaning products, and institutional surface maintenance where trigger durability under higher cycle frequency is a reliability requirement. The 28/410 neck finish is widely used across commercial cleaning bottle formats, simplifying compatibility verification.

Recommended Products

All Plastic Trigger Sprayer

MB-AP002

All Plastic Trigger Sprayer

MB-AP006

All Plastic Trigger Sprayer

MB-AP004 (Mesh Foam)

About Yuyao Mingbang Spray Packing Co., Ltd.

Yuyao Mingbang Spray Packing Co., Ltd. is located in Zhejiang Province, close to major highways and high-speed railways, approximately 2.5 hours from Shanghai and 30 minutes from Ningbo port. The factory specializes in trigger sprayers, finger sprayers, lotion pumps, perfume sprayers, and plastic sprayer bottles, serving cosmetic packaging, health care, and industrial cleaning industries. OEM orders with custom brand logo printing are supported, and in-house logistics enables DDP and DDU shipment arrangements from Ningbo.

Frequently Asked Questions

Q1: How is quality controlled?

A QC team complies with TQM standards; each production step is verified against specifications. Photo and video documentation is available on request.

Q2: Can our brand logo be printed on the product?

Yes. Custom brand logo printing is available after receipt of buyer authorization documents for legally registered patent packaging.

Q3: What are the packing terms?

Standard packing uses neutral cartons with OPP bag inner packaging, 500 pieces per carton, 56×45×39 CM. Custom branded cartons available with buyer authorization.

Q4: What are the payment terms?

Western Union and T/T accepted. Standard terms: 30% deposit, balance before shipment. L/C at sight or 30 days also accepted.

Q5: What is the delivery time?

Approximately 15 to 25 days from order confirmation and deposit receipt.

Q6: Is logistics support available?

Yes. In-house logistics teams cooperate with destination-port freight forwarders for DDP and DDU arrangements. A Ningbo port warehouse supports mixed-SKU consolidation before shipment.

Sourcing Information

For procurement teams evaluating the Longcheng Plastic PP Non-Spill Pump Sprayer MB-AP002 Screw-On Closure for Chemical House Cleaning Strong Head Foaming Trigger, the minimum order quantity is 30,000 pieces, FOB Ningbo or Shanghai, with delivery in approximately 15 to 25 days. Color options are available. Sample validation against target bottle neck finish and formula is recommended before production approval.