×
The Non Spill Durable PP Plastic Chemical Pump Sprayer 28/400 28/410 28/415 Thread Refillable Stainless Steel Nozzle Bottles is built around three functional requirements that matter most in chemical dispensing: neck finish compatibility, material resistance to the target formula, and reliable output dose across repeated use cycles. The polypropylene body combined with a 316 stainless steel ball valve delivers chemical resistance at the critical sealing point, while the non-spill mechanism prevents accidental discharge during transport and storage. Available in 28/400, 28/410, 28/415, and Ratchet neck finishes, this trigger sprayer covers the standard bottle profiles used in chemical, cleaning, and industrial product packaging.
Specifications below are based on manufacturer-provided data. Buyers with aggressive or specialty formulas should confirm compatibility through sample testing before production commitment.
| Parametrum | Specificatio |
|---|---|
| Nomen producti | Tota Plastica Aspersorium Manualis |
| Finis Colli | 28/400, 28/410, 28/415, Ratchet |
| Materia corporis | PP (Polypropylene) Plastic |
| Materia pila | aer 316 Inoxydabilis |
| Rate Exhauritionis | 1.1 ± 0.1 mL per trigger pull |
| Colores | Optio |
| MOQ | 30,000 pieces |
| Sarcina | 500 pcs/carton, OPP bag, 56×45×39 cm |
| Portus FOB | Ningbo / Shanghai |
| Origin | Ningbo, Zhejiang, China |
| Tempus praecedens | 15–25 Dies |
| Solutio | T/T 30% deposit, balance before shipment; L/C accepted |
The non-spill mechanism prevents accidental liquid discharge when the bottle is inverted or moved during handling. This is a direct safety requirement in chemical packaging where uncontrolled release creates contamination and waste risk. For buyers packaging corrosive cleaners or industrial solvents, this feature eliminates one of the most common failure modes in standard trigger sprayers without additional components.
Standard rubber ball components degrade in high-alcohol or high-acid formula environments, typically showing seal failure after weeks of distribution. The 316 stainless steel ball in this sprayer addresses that failure mode at the sealing point. A frequent sourcing oversight is confirming body material without verifying the ball valve material — the ball determines long-term sealing reliability under chemical exposure. If your formula contains high-alcohol sanitizers, acidic cleaners, or specialty compounds, the 316SS ball specification is the component requiring verification through sample testing.
Dosis output constans est in dispensatione chymica, ubi applicatio nimia vel insufficiens consequentias operationales habet. Ratio nominalis 1.1 mL cum tolerantia ±0.1 mL definit output sub condicionibus pressionis verticalis normalibus. Volumen dispensationis reale variat secundum angulum et celeritatem pressionis; ideo specificatio tolerantiae datam acquisitionis utiliorem praebet quam figura nominalis unica. Experimentum exemplaris contra viscositatem specificam formulae tuae et condiciones usus est gradus qualificandi rectus pro applicationibus sensibilibus ad dosim.
Hoc sprayerum ad repetitas implere et uti cycli designatum est, quod ad mercatus institutionales et professionales de munditia pertinet, ubi implere ex magnis contentoribus communis modus operandi est. Mechanismus non-effundentis valvulae repetitas implere permittit sine aucta pressione vel progressiva degradatione sigilli per cycli, ita ut constans effluentis velocitas per longam vitam producti servetur. Designa pumparum simplicium, quae semel implentur, saepe fatigationem moli et attritionem sigilli post tres ad quinque implere cycli ostendunt; haec construens reimplibilis pro altiore frequential implendi, quae in institutionibus ubi chymica dispensantur, communis est, fabricata est.
The 28/400–28/415 neck finish range covers the standard bottle profiles used in commercial cleaning packaging — surface disinfectants, degreasers, and multi-surface cleaners. The non-spill design suits applications where bottles are frequently tilted during use. For formulas with alcohol content above 70%, full component compatibility testing before production is required.
Institutional applications including hospital disinfectants, food service sanitizers, and industrial maintenance chemicals require pump sprayers that perform reliably over extended cycles. The refillable build and 316SS ball valve suit environments where pump replacement carries operational cost and formula compatibility is a procurement requirement. The 30,000-piece MOQ and FOB Ningbo pricing fit institutional-scale procurement planning.
PP trigger sprayers with stainless steel internals sunt usitae in agricultura et speciali chemicali impachetatione, ubi standardia rubber componentia per tempus degradari possunt sub conditionibus expositionis chimicae. Quattuor optiones collari finitionis tegunt botellarum profila quae in mercatis agriculturae Europae, Americae Septentrionalis et Asiae usurpantur. Emptores in hoc segmento debent integrum componentium aggregatum contra specificam formulam verificare antequam ad productionem committant.
Yuyao Mingbang Spray Packing Co., Ltd. fabricat sprayeres ad actuationem, sprayeres ad digitos, pompas ad lotiones, sprayeres ad perfumes, et bottellas plasticas ad sprayeres in Ningbo, Provincia Zhejiang — 30 minuta a Portu Ningbo. Societas administrat controllem qualitatis secundum systema TQM, cum documentis praebitis ad singulos gradus productionis. Impressio marcae personalis et impachatio cartonum cum logo admittuntur sub autorisatione emptoris. Propria infrastructura logistica sustinet delivationes DDP et DDU, et magazinum ad Portum Ningbo permittit conglutinationem pro mittendis mercibus multis SKU. Cum emuntur Bottellae Non Spill Durable PP Plastic Chemical Pump Sprayer 28/400 28/410 28/415 Thread Refillable Stainless Steel Nozzle, emptores proficiunt ex productione multorum collorum (neck finishes) sub uno suppeditatore, quod minuit laborem requalificandi cum mutatur origo aut ampliatur series SKU.
Production follows a TQM framework with quality checks at each step. Photo and video documentation are generated at each production stage and can be shared with buyers for remote quality review before shipment.
Yes. Custom brand logo printing is available. Logo carton packing is supported with appropriate brand authorization documentation.
T/T with 30% pre-payment, balance before shipment. L/C at sight or 30-day terms also accepted. Production lead time is 15–25 days after payment confirmation.
Own logistics team works with forwarders at destination ports for DDP and DDU support. Ningbo Port warehouse enables mixed-product shipment consolidation for multi-SKU orders destined for multiple locations.
30,000 pieces. Buyers with smaller qualification requirements should inquire directly about sample availability for initial product testing and formula compatibility evaluation.
EN
